spark advance
英 [spɑːk ədˈvɑːns]
美 [spɑːrk ədˈvæns]
网络 点火提前; 火花提前; 提前点火角度
英英释义
noun
- the timing of ignition relative to the position of the piston in an internal-combustion engine
双语例句
- There is an optimal spark advance for the successful cold start of the LPG engine which is 10 ° CA BTDC.
LPG发动机首次循环可靠起动的最佳点火提前角为上前10°CA。 - Deceleration spark advance control
减速点火提前控制装置 - The exhaust temperature and gas consumption rate were analyzed with different coefficient of excess air and spark advance angle.
针对大功率气体天然气发动机热负荷较高的问题，研究了不同负荷和过量空气系数下的排气温度及气耗率。 - A new type of centrifugal spark advance device is adopted in model FD663 contactless distributor.
FD663型无触点分电器采用了一种新的离心提前机构。 - Study on Idling Speed Stability by Spark Advance Angle Controlling Based on CMAC
基于CMAC的点火提前角控制怠速稳定性的研究 - Firstly, the CNG engine torque control theory is introduced, and the relationship between the engine output torque and the three control parameters: the spark advance angle, the air-fuel ratio and the throttle opening, is derivated.
首先，研究天然气发动机转矩控制理论，推导点火提前角、空燃比和节气门开度三个控制参数与转矩之间的关系。 - By rational designing the combustion chamber, choosing the compression ratio, adopting the electronic controlled ignition system with spark advance angle along with speed's change and optimizing the LPG-air blender, the single cylinder gas fuel engine acquires the fine integrated performance.
该机通过合理的设计燃烧室，选择适当的压缩比，采用点火提前角随转速变化的电子控制的点火系统，通过对燃气和空气混合器的优化，使单缸燃气发动机取得了优良的综合性能。 - Spark control include three parts, Dwell control, Spark advance control and Knock control.
点火控制包括三大部分，即：充磁（即闭合角）控制、点火提前角控制和爆震控制。 - On front panel of control system, ignition parameters which engine operation need according to experiment demands can be recomposed ( spark advance angle and charging interval can be modified on line and spark advance, charging interval, rotate speed et al can be displayed).
在控制系统前面板上，可以根据要求设定发动机工作所需要的点火参数，即可在线调节点火提前角和充电时间，并对点火提前角、充电时间、转速等进行显示。 - The major technologies used include increasing compression ratio, changing spark advance angle and using intake pulse turbo-charging.
主要采取了提高压缩比、改变点火提前角及采用进气脉冲增压技术。